KEY FEATURES

•  Unlocks the 6 GHz band to more than double the available capacity in wireless networks
• Comprehensive dual radio/tri-band coverage across 2.4 GHz, 5 GHz, and 6 GHz to deliver up to 3.6 Gbps combined peak data rate1
• Compact and low power consumption – virtually unrestricted operation from an 802.3af (class 3) PoE source2
• Up to seven 160 MHz channels in 6 GHz to support low-latency, bandwidth-hungry applications like highdefinition video, and augmented reality/virtual reality applications
• 2.5 Gbps Smart Rate Ethernet port to minimize wired bottlenecks
• Built-in GPS receivers and fine time measurement (802.11mc) to enable APs to automatically locate themselves and serve as reference points for accurate indoor location measurements

ANTENNA PATTERNS AP-615
Horizontal planes (top view)
 

Specifications

Hardware variants
AP-615: Internal antenna models
Wi-Fi radio specifications
AP type: Indoor, dual-radio/tri-band 2.4GHz, 5GHz and 6GHz (dual concurrent) 802.11ax 2x2 MIMO
2.4GHz radio: Two spatial stream Single User (SU) MIMO for up to 574Mbps wireless data rate with 2SS HE40 802.11ax client devices (287Mbps for HE20)
5GHz radio: Two spatial stream Single User (SU) MIMO for up to 1.2Gbps wireless data rate with 2SS HE80 802.11ax client devices
6GHz radio: Two spatial stream Single User (SU) MIMO for up to 2.4Gbps wireless data rate with 2SS HE160 802.11ax client devices
Up to 512 associated client devices per radio, and up to 16 BSSIDs per radio (limited to 4 for the 6GHz radio)
Supported frequency bands (country-specific restrictions apply)*:
•2.400 to 2.4835GHz ISM
•5.150 to 5.250GHz U-NII-1
•5.250 to 5.350GHz U-NII-2A
•5.470 to 5.725GHz U-NII-2C
•5.725 to 5.850GHz U-NII-3/ISM
•5.850 to 5.895GHz U-NII-4
•5.925 to 6.425GHz U-NII-5
•6.425 to 6.525GHz U-NII-6
•6.525 to 6.875GHz U-NII-7
•6.875 to 7.125GHz U-NII-8
Available bands and channels: Dependent on configured regulatory domain (country)
•Dynamic frequency selection (DFS) optimizes the use of available RF spectrum in the 5GHz band
Transmit power: Configurable in increments of 0.5 dBm
Maximum (aggregate, conducted total) transmit power (limited by local regulatory requirements):
•Per radio/band (2.4GHz / 5GHz / 6GHz): +21 dBm (18dBm per chain)
•Note: conducted transmit power levels exclude antenna gain. For total (EIRP) transmit power, add antenna gain.
Advanced Cellular Coexistence (ACC) minimizes the impact of interference from cellular networks
Maximum ratio combining (MRC) for improved receiver performance
Cyclic delay/shift diversity (CDD/CSD) for improved downlink RF performance
Space-time block coding (STBC) for increased range and improved reception
Low-density parity check (LDPC) for high-efficiency error correction and increased throughput
Transmit beam-forming (TxBF) for increased signal reliability and range
802.11ax Target Wait Time (TWT) to support low-power client devices
802.11mc Fine Timing Measurement (FTM) for precision distance ranging
Wi-Fi antennas
AP-615: Integrated downtilt omni-directional antennas for 2x2 MIMO with peak antenna gain of 2.8dBi in 2.4GHz, 4.5dBi in 5GHz and 4.5dBi in 6GHz. Built-in antennas are optimized for horizontal ceiling mounted orientation of the AP. The downtilt angle for maximum gain is roughly 30 to 40 degrees.
   •Combining the patterns of each of the antennas of the MIMO radios, the peak gain of the combined, average pattern is 2.0dBi in 2.4GHz, 3.5dBi in 5GHz and 3.4dBi in 6GHz.